12Volt Non Waterproof 3528SMD Sinlge Color LED Strips 60LED/M 

Summarization

This flexible, self-adhesive LED strips are perfect as a backlight and can be laid on curves or corners. Cut the strips easily with scissors in 5 cm units to the desired length (up to 5 meters).

Technical data:

• Number of LEDs: 60leds/m
• Power consumption: 0.06 watts per LED
• Life: >50,000 hours
• Light power: 4.5~5lm per LED
• Light color: warm white/3500 K, pure white/6000K
• Beam angle: 120 °
• Protection: IP33 (Only suitable for indoor use)
• Operating temperature: 30°C (no heat)
• Operating voltage: 12VDC (direct current)
• Length: 5m
• Width: 8 mm
• Height: 2 mm
• Connection via solder pads on the LED strip (labeled + / - note)
• Dimmable: yes
• Shock Sensitive: No
• Mounting: with 3M double-sided adhesive tape on backside
• Minimum bend radius: about 2 cm
• No UV component in light (illuminated objects do not fade)
• No IR component in light (illuminated objects do not heat up)

 Products Image

Yellow and White PCB are available, Non Waterproof and Waterproof ones are also available:

IP33: Bare board

IP67 (Type A in our factory): with half PVC tube on the back of the strip and epoxy glue covered on its obverse

IP65 (Type B in our factory): with silicone tube encasing and sealed with caps at both ends

IP65 (Type C in our factory): with epoxy glue covered on obverse and sealed with heat-shrinkable tube at both ends

IP68 (Type D in our factory): with silicone tube encasing and insert epoxy glue inside, sealed with caps at both ends

Application

1. Cove lighting

2. Architectural lights for canopy, corridor, window, archway

3. Backlight or edge lighting for signage

4. DIY lights for home use

5. Path and contour marking

6. Decorative lights for holiday, event, show, exhibition